Residential Asphalt Care Plans
Asphalt is a durable and cost-effective paving solution, but it is vulnerable to damage from sun, water, and chemicals. Our proactive maintenance plans are the most effective way to protect your driveway, dramatically extend its lifespan, and keep it looking its best—all for a fraction of the cost of repaving.
Our Asphalt Care Plans & Pricing
Crack & Prep
Driveway Size: Standard 2-Car
Service: Crack Repair Only
Total Estimate: $350 - $550 / year
- Two Annual VisitsIncludes a spring and fall visit for comprehensive care.
- Surface Cleaning & PrepPower blowing of debris and wire-brushing of cracks.
- Hot Rubberized Crack FillingSealing all major cracks with a flexible, durable material to block water.
- Stain PrimingApplying a special primer to oil and gas stains to ensure sealer adhesion.
Seal & Protect
Driveway Size: Standard 4-Car (approx. 600 sq.ft.)
Price / sq. ft.: Approx. $1.25
Total Estimate: $700 - $950 / year
- Everything in Crack & Prep, plus:
- Two Annual VisitsIncludes a spring and fall visit for comprehensive care.
- Professional SealcoatingApplication of a high-quality, commercial-grade asphalt sealer to protect the entire surface.
- Restored FinishRevitalizes the asphalt with a rich, uniform black finish, dramatically boosting curb appeal.
Elite Restoration
Driveway Size: Large / Custom
Service: Full Repair & Seal
Total Estimate: $1,200 - $1,800 / year
- Everything in Seal & Protect, plus:
- Two Annual VisitsIncludes a spring and fall visit for comprehensive care.
- Pothole / Patch RepairAddressing localized areas of severe damage with either infrared or cut-and-patch methods.
- Edge RepairReinforcing and repairing crumbled driveway edges to prevent further deterioration.
Why Choose Our Asphalt Care?
Prevent UV Oxidation
Sunlight dries out the binder in asphalt, turning it grey and brittle. Sealcoating applies a new protective layer that shields the asphalt from UV rays, keeping it flexible and black.
Stop Water Damage
Crack filling is crucial. Sealing cracks with hot rubberized filler prevents water from reaching the base layer, where it causes potholes and "alligator" cracking during freeze-thaw cycles.
Resist Spills & Chemicals
Sealcoating creates a non-porous barrier that prevents oil, gasoline, and other chemical spills from penetrating and softening the asphalt, making cleanup simple and preventing long-term damage.
Our Asphalt Care Process
Surface Preparation
We begin by thoroughly cleaning the entire driveway using power blowers and wire brooms to remove all dirt, dust, and debris. This ensures maximum adhesion for our treatments.
Crack & Stain Treatment
We clean out all major cracks and apply hot-rubberized crack filler for a waterproof, flexible seal. Any oil or gas stains are primed to neutralize them and prevent them from bleeding through the new sealer.
Professional Sealcoating
Finally, we apply a generous coat of commercial-grade asphalt sealer, carefully edging all sides. This protective layer restores the rich black finish and shields your driveway from the elements.
Get a Free Quote for Asphalt Care
Frequently Asked Questions
We recommend sealcoating your driveway every 2-3 years. This provides consistent protection against UV rays and water damage, which is far more cost-effective than repaving.
The best time is during dry weather when the temperature is consistently above 10°C, typically from late spring to early fall in the Toronto area. This allows the sealer to cure properly.
We recommend staying off the driveway for a full 48 hours to allow the sealer to cure completely. You can typically walk on it after 24 hours, but vehicle traffic should wait to prevent tire marks.